Installing Additional RAM

After the CPU has been installed, insert the RAM included in the kit into memory sockets B1 and B2.

Handle each memory module only by the edges to ensure that you don't touch the middle of the memory module or the metallic contacts.

To prevent damage to the memory module or memory module socket during installation, do not bend or flex the memory module. You must insert both ends of the memory module simultaneously.

1. In the row of empty memory sockets near to the newly installed CPU, locate sockets B1 and B2.
2. Open the white ejector clips (shown as black in the diagram) on each side of the empty memory module sockets outward to allow the memory modules to be inserted into the sockets.

3. Align the edge connector of the memory modules with the alignment key of the sockets and press the memory modules into sockets until the socket levers click into place.

Do not apply pressure at the center of the memory module. Apply pressure to both ends of the memory module evenly.

If you are installing both the AI NVR Performance Upgrade Kit and the AI NVR Standard 10GbE Kit (AINVR-STD-10GBE) in the AI NVR, use the using the instructions in the "Installing the 10GbECard in Slot 3 of Expansion Riser 1" section of the AI NVR Standard 10GbE Kit Installation Guide, which includes instructions to install the graphics card provided in this kit, to complete the installation of both kits.